Stern Performance Clubsport-Style Rear Seat Delete Kit - VW Golf Mk8
Stern Performance Parts Clubsport-Style rear seat delete kit for VW Golf Mk8
This product is for the complete strut bar, net and rear carpet kit.
Please Note - These are very high quality products, made completely in house in Stern Performance Parts facility in Germany. Because of specifications, please allow 4-6 weeks for your product to arrive. Typically it will take a lot less than this, but with current travel / import issues, we may experience delays getting orders to the UK. Due to high import fees, the postage cost of Stern Performance products is £80. The quality and finish of these products more than makes up for the wait, that's why we use this kit on our own Mk8 Clubsport! Thank you for understanding.
Stern Performance Parts are made for motorsport enthusiasts who remove their back seats for the racetrack.
The rear seat bench will be removed and replaced by a strut bar, net and carpet and causes a weight reduction that improves your performance and gives the car a sporty and clean OEM look.
All products are handcrafted to the highest quality standards by our tailors at our location in Kaltenkirchen, Germany.
We have high quality standards and therefore we put great value on quality and workmanship in our entire product range.
What does a rear seat delete kit do?
The idea of removing/deleting the rear seat bench is to save weight and increase the performance on the racetrack. In addition to performance factor, the whole kit is a rear-catcher.
To install the kit, the rear seat bench needs to be removed completely. The removal of the rear seat bench can be done in a few minutes. Instructions are included in the parcel.
Depending on the vehicle and the material of the rear seat bench, you can save up to 25 kg. The full kit itself weighs around 5 kg in total. We saved 23kg in our own Mk8 Clubsport.
How to install
The installation of the rear seat delete kit and carpet is very easy and simple. The kit is plug and play and can be installed within a few minutes. At first, you lay down the carpet in the car.
The strut is attached using aluminium plates attach to the outside of the strut bar. The strut bar is firmly screwed to the seat holder with aluminium plates.
Place the aluminium plate of the strut bar on top of the seat holder, place the second aluminium plate under the seat holder and screw the seat brackets using the screws supplied.
The net is attached to the Isofix points in the back of the rear seat bench area by using our net loops. Put the net around the Isofix holder and put it back into the shift regulators.
The tension of the net can be adjusted by using the slide regulators like a backpack. It's very easy and simple.
Configuration options / extras
The strut bars are made out of aluminium and are powder-coated in the colour of your choice. For an upcharge, we also offer full carbon strut bars.
Also, the net is also available in several colours. Optionally we can do contrast stitching in the net. Therefore please leave a comment in the comment section.
The carpet is also part of the full kit and you can also choose a contrast stitching. The seam colour is black as standard.
On request, we can also powder coat the strut bar in the RAL colour of your choice. Just leave a message in the comment section.
In case your requested colour is no RAL colour, please contact us before ordering so we can check the options we have.
Product quality
All products, such as strut bars, nets and carpets have been specially developed for your vehicle and we guarantee a 100 % accuracy of fit.
The strut bars are made out of aluminium tubes and we powder coat the bars in-house. The nets are tailored by our well-experienced tailors who pay attention to clean and straight seams.
Our carpet is made of high-quality velor carpet that covers the area from the former rear seat bench to the end of the trunk. The carpet fabrics are from german vehicle manufactuters.
The edge is made out of synthetic leather and fits flush with the bodywork and the bottom of the carpet is made of structured rubbers and gives the carpet a firm hold on the vehicle. No extra fixings necessary.
Kit Contains
- rear seat delete strut bar
- rear seat delete net
- rear seat delete carpet
- assembly parts (bottom metal plate, 4 screws, 4 washers)
How we deal with custom-made products (strut bars, nets, carpets)
Please note that the products are manufactured on customer request and are therefore custom-made.
For this reason we cannot accept cancellations, order changes or returns. We cannot make any exceptions.
Legal information (vehicle registration & taxes)
The legal conditions regarding the entry in the vehicle documents vary in each country.
We recommend that you inform yourself about the legal conditions in your country before purchasing the kit.